July 6, 2017 at 9:05 am #46250MaxKeymaster
To be truly dangerous to your enemies, train at MVT.
For those of you not on the Forum , you will not have been following this, so Ia am putting it up here.
It has long been ‘received wisdom’ that we cannot do any long range shooting at the VTC in Romney, due to the tree coverage. However, having done some map studies ground and surveys, we are about to change that. We have a firing point and two target points at approximately 500 and 1000 yards. There is more possibility on that in the future, it just depends what trees / line of sight notches we plan on cutting.
I began the cutting of notches in the trees last week. This weekend, I will be up there with some volunteers working on the new team bunkhouse,a and also cutting in the notches to allow these shoots to happen. In the photos below, you will see where I have rough cut in the firing point and the 500 yard point, at that time simply to confirm line of sight. Once we have these notches nicely cut in, we will place steel targets.
We are not sure at this time exactly what long range shooting offerings we will make. That side is under development. When I cut the notches this weekend, I was up there for a SOF recon of the training site for a class, and showed the firing point notch to an experienced sniper, asking him: ‘Is there value in this.” He told me yes, because mostly people will shoot out to 1000 on flat ranges, but here we have the shoot going over a central ridge at 500 yards, and involving two valleys, which will produce interesting wind effects. In fact, the whole shoot is interesting and novel, with an amazing panorama form the firing point.
We may offer something along the lines of a ‘long range workshop’ with John, who is a sniper instructor. At the very least, this is an interesting capability addition to the VTC.
Below: first cut of the firing point notch, looking out at the approx. locations of the 500 and 100 yard ridges.
Below: first cut of the 500 yard point, looking back at the firing point.
General Info / Links:July 6, 2017 at 10:42 am #46252PinkyParticipant
very cool. I’d be up for a long range class there.
"No free man shall ever be debarred the use of arms."
-- Thomas JeffersonJuly 6, 2017 at 11:01 am #46256veritas556Participant
I’m in.July 6, 2017 at 12:46 pm #46265
A long range work shop weekend would be good, never shot valley’s but lot of hills and flat land shooting/hunting thou.
thanks for the update’s
Alumni living in N.E Fla. for now. Going to retire in Iowa on the farm some day soon.July 6, 2017 at 1:25 pm #46270JohnnyMacParticipant
I’d definitely be down for some long range shooting with John.
Now, I just need a precision rifle…July 6, 2017 at 2:29 pm #46271
Ruger 6.5 CM good weapon
Alumni living in N.E Fla. for now. Going to retire in Iowa on the farm some day soon.July 6, 2017 at 2:34 pm #46272July 6, 2017 at 2:47 pm #46273
make sure it’s a Gen 2. most people I shoot with have replace the stock with a Magpul gen 2 PRS stocks. as for Bipods look at the Atlas ones $$ well worth it. Get good glass a least up to 25x power FFP, great for ranging targets and hold overs without dialing dope.
Tikka TAC A1 are great very smooth actions and very acc. less then 1 moa at distance.
Alumni living in N.E Fla. for now. Going to retire in Iowa on the farm some day soon.July 8, 2017 at 9:42 am #46321RobertParticipant
Sweet! I’ve been thinking since you first mentioned this how different the distance shooting will be up there versus down here.
Down here- flat as a pancake. The wind is definitely going to open up some learning curves up there. We shot in 30mph wind in Texas one time- that sucked, but it was a great opportunity to truly learn the wind more. However that also was FLAT. Up at VTC you could have some interesting wind combinations, hell yes this is going to be awesome!!!
RMP, TC3, NODF, CRCD 6/14, CP 9/14. NODF, Land Nav, 6/15. Rifleman Challenge 9/15- Vanguard. FOFtactics 3/16, 10/16, 11/16, 6/17,11/17 CTT, 6/15, 11/16, , LRMC-1 9/17 GA Mobile CTT and DA 10/16, GA mobile DCH 3/18, HEAT1 3/18 Alum weekend 8/18, Opfor CLC 10/18, DA 11/18 CQBC 12/18, 5/19
- You must be logged in to reply to this topic.